Why Is The 2015 Audi S4 Brake Pad Light Still On After Replacing?

WP Pro Carbon Metallic Street Brake Pads for S4 Brake Kit from www.vividracing.com

If you own a 2015 Audi S4, you may have experienced the brake pad light staying on even after replacing the brake pads. This can be frustrating and confusing, especially if you are unsure of the cause. In this article, we will discuss some of the reasons why this issue may occur and what you can do to fix it.

Reasons for Brake Pad Light Staying On

1. Faulty Brake Pad Sensor

One of the most common reasons for the brake pad light staying on is a faulty brake pad sensor. The sensor is located on the brake pad and is designed to alert you when the brake pads have worn down too much. If the sensor is faulty, it may send a false signal to the car's computer system, causing the brake pad light to stay on even after replacing the brake pads.

To fix this issue, you will need to replace the faulty sensor. You can purchase a new sensor from an Audi dealership or an auto parts store. The replacement process is relatively simple and can be done at home with a few basic tools.

2. Incorrect Installation of Brake Pads

Another reason why the brake pad light may stay on after replacing the brake pads is if they were installed incorrectly. If the brake pads are not installed properly, they may not be making proper contact with the rotor, causing the sensor to send a false signal to the car's computer system.

To fix this issue, you will need to remove the brake pads and reinstall them correctly. Make sure that the brake pads are making proper contact with the rotor and that they are securely in place.

Tips for Fixing the Issue

1. Check the Brake Fluid Level

If the brake pad light is still on after replacing the brake pads and checking the sensor, you may want to check the brake fluid level. If the fluid level is low, it may cause the brake pad light to stay on. Adding more brake fluid may fix the issue.

2. Reset the Car's Computer System

If you have tried all of the above solutions and the brake pad light is still on, you may need to reset the car's computer system. This can be done by disconnecting the car's battery for a few minutes and then reconnecting it. This will reset the computer system and may fix the issue.

Conclusion

If you are experiencing the brake pad light staying on even after replacing the brake pads, it can be frustrating and confusing. However, by checking the sensor, ensuring that the brake pads are installed correctly, checking the brake fluid level, and resetting the car's computer system, you can fix the issue and get back on the road safely.